Takura Steel Buildings
Takura Steel Buildings is a leading supplier of Pre-Engineered Metal Buildings and Components.
Insulated Panels
“Melt-Span panels are economical, offer unlimited design flexibility, and are durable and quick to install.”
Get a Free Quotes
HPCI Barrier
The HPCI Barrier™ insulated metal panel is an air, water, thermal and vapor barrier panel that can be used behind any type of facade. The HPCI Barrier back-up panel is installed in a horizontal orientation completely outside the structural supports. There are no thermal bridges to reduce the energy efficiency of the wall. HPCI Barrier is quick and easy to install and provides an economical solution to conventional air, water, thermal and vapor control without sacrificing thermal efficiency.
Exterior Profile:
No profile embossed
Interior Profile:
Light Mesa embossed
Panel Core:
Foamed-in-place, Non-CFC & zero ODP polyurethane
Thermal Values:
K-factor, Btu in/ft2 hr. °F @ 75°F (24°C) mean core temperature = 0.140
Module Width:
42″
Panel Thickness:
2″, 3″, 4″
Panel Lengths:
8′-0″ to 24′-0″
Exterior Facings:
Minimum .016″ thick HPCI galvanized steel
Interior Facings:
Minimum .016″ thick HPCI galvanized steel
Panel Joint:
Offset double tongue and groove with extended metal shelf for positive
face fastening
Fastening:
Fastener and Clip concealed in the side joint Factory caulking available
Finishes & Colors:
White polyester
Oil Canning:
All flat metal surfaces can display waviness commonly referred to as “oil canning.” “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.
Note: The HPCI Barrier Panel must be separated from the interior of the building by an approved thermal barrier of .5″ (12.7mm) gypsum wallboard to meet IBC requirements.
Unlike traditional backup wall systems, the HPCI Barrier is easily and quickly installed in a single step – eliminating the need for multiple work crews, minimizing construction debris, and reducing the likelihood of improper installation that could strike any stage of a traditional multi-layer scenario. In addition, the HPCI Barrier back-up panel is installed in a horizontal orientation completely outside the structural supports, so there are no thermal bridges to reduce energy efficiency. It’s an advanced all-in-one insulated metal composite solution – backed by the industry innovation of Metl-Span.
| Exterior Profile: | No profile embossed | |||
| Interior Profile: | Light Mesa embossed | |||
| Foam Core: | Foamed-in-place, Non-CFC & zero ODP polyurethane, FM Class 1 approval. | |||
| Thermal Values: | R-Values with Air Films | 75° Mean | 40° Mean | |
| 2″ Panel | 15.14 | 17.03 | ||
| 3″ Panel | 22.27 | 25.55 | ||
| 4″ Panel | 29.42 | 34.06 | ||
|
• R-Values include the air films on each side of the panel. • 75° Mean based on ASTM C518 Thermal Testing. 40° Mean based on ASTM C1363 Thermal Testing (Values for C1363 based on 4″ panel testing). All values for other thicknesses extrapolated. |
||||
| Module Width: | 42″ | |||
| Panel Thickness: | 2″, 3″, 4″ | |||
| Panel Lengths: | 8′-0″ to 24′-0″ | |||
| Horizontal Application Reveal Widths: | 1/4″, 1/2″, 3/4″, 1″, 1-1/2″, 2″, 2-1/2″, 3″ | |||
| Exterior Facings & Interior Facings: | Minimum .016″ thick HPCI galvanized steel | |||
| Color: | White polyester | |||
| Joint: | Offset double tongue and groove with extended metal shelf for positive face fastening. | |||
| Note: | Offset double tongue and groove with extended metal shelf for positive face fastening. | |||