The Metl-Span Striated insulated metal wall panel is an attractive and economical alternative to typical flat wall panels. The exterior face is lightly profiled with narrow longitudinal striations and exhibits a virtual flat appearance from a short distance away. The Striated wall panel is an exceptional value combining the aesthetics of a flat wall panel and high insulation ratings of a polyurethane core.

Note: Not intended for exterior walls on cold storage buildings.

Exterior Profile:
Longitudinal striations, nominal 1/32″ deep

Interior Profile:
Mesa nominal 1/8″ deep; Light Mesa nominal 1/16″ deep

Panel Core:
Foamed-in-place, Non-CFC & zero ODP polyurethane, FM Class 1 approval

Thermal Values:
K-factor, Btu in/ft2 hr. °F @ 75°F (24°C) mean core temperature = 0.140
K-factor, Btu in/ft2 hr. °F @ 40°F (4°C) mean core temperature = 0.126

Module Width:
30″, 36″, 42″

Panel Thickness:2″, 2 1/2″, 3″ (2 3/4″ thickness also available from Nevada plant)

Panel Lengths:
8′-0″ to 40′-0″ for the 30″ & 36″ widths, 8′-0″ to 32′-0″ for the 42″ width

Exterior Facings:
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga.

Interior Facings:
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga.

Panel Joint:
Offset double tongue and groove with extended metal shelf for positive
face fastening

Fastening:
Fastener and Clip concealed in the side joint

Color:
A full range of exterior colors & coatings are available for the architectural market. For specific information about our available colors and coatings, visit us online for a comprehensive selection.